|Model Number:||TWD200||Drilling Depth:||0-200m|
|Drilling Diameter:||0-254mm||Drill Pipe Length:||2/3m|
|Usage:||Water Well Drilling||Drilling Methold:||DTH Drilling & Mud Drilling|
|Engine Power:||33KW||Mud Pump:||BW250/BW200|
33KW water well drilling rig,
33KW water well rig,
DTH water well drilling rig
TWD200 Trailer Hydraulic Borehole Drill Water Well Drilling Rig
TWD200 is compact in structure and convenient to carry. The whole machine adopts full hydraulic drive and has low failure rate.The tower assembly has a hydraulic compensation mechanism. When the tower is grounded during construction, the bearing capacity is greater and the stability is higher.
|Geology drilled||All kinds|
|Drill depth||0-200 m|
|Drilling Diameter||90 - 200mm(DTH.max.6''hammer)|
|Drilling Diameter||90 - 250mm(Mud Drilling)|
|Rig assembly||1 complete unit, main engine driven|
|Mobility||2 wheel tandem road trailer|
|Transportation||Towed by pickup or light truck|
|Drill pipe (diameter x length)||76/89 mm x 2 m|
|Foam pump||Hydraulic driven(Optional)|
|Rotation & Feed System|
|Top head drive by a hydraulic cylinder|
|Rotation torque||2600 N-m|
|Speed||0 - 80 rpm.|
|Head travel||2.25 meter|
|Pull-up speed-slow feed||1.22 meter/min|
|Pull-up speed-rapid feed||12.26 meter/min|
|Pull-down speed-slow feed||0-1.88 meter/min|
|Pull-down speed-rapid feed||0- 16.90 meter/min|
|Drill pipe length||2.00 meter|
|Drill pipe diameter||76/89 mm|
|Thread||2 3/8 REG API Mod|
|Power pack speed||3000 rpm.|
|Load power pack||max. 47 hp.|
|Flow capacity||400 liter/min|
|Foam Tank||50 liter|
|Max. working pressure||40 bar|
|Hydraulic tank capacity||180 liter|
|2 rear hydraulic & 1 mechnical jacks(2 front Hydraulic jack optional).|
|Lubricator of venturi-type for down-the-hole drills.|
|Max. pressure||40 bar|
|Oil tank capacity||8 liter|
|Overall height||2100 mm|
1 One person operation, save labor cost.
2 With universal wheel,convenient to transport.
3 Economical,can be owned by common families.
4 Light weight, simple operation,very easy to install.
Q: Are you original manufacturer?
A: Yes, we JCDRILL is a official leading manufacture in drilling machinery in China and we have
the whole series products you need.
Q: Which payment terms are available to us?
A: T/T term or L/C term. On T/T term, 30% down payment is required in advance, and 70% balance shall be settled before shipment.On L/C term, a 100% irrevocable L/C without "soft clauses" can be accepted.
Q: How long will the delivery time take?
A: Normally mud pump products will take about 3-15 days to produce the ordered machines. Most of the time, we can have an immediate delivery of our regular machines in 15 days.
Q: How about after sales service?
A: 365×24 Year-round Service We are committed to year-round 24-hour service even during holidays, in line with our policy of always providing "a response within 15 minutes and job completion within 24 hours."
Q: Spare Parts When You Need Them
A:We have spare parts centers across continents that stock specialist spare parts. We promise that spare parts will be delivered within 72 hours or no more than one week.
Contact Person: Sekura Yu