|
Product Details:
|
| Type: | Core Drilling Rig | Dill Depth Capacity: | 1000M（BQ） |
|---|---|---|---|
| Hole Diameter: | BQ,NQ,HQ,PQ | Drill Angle: | 45°-90° |
| Max Rotation Toque: | 3700N.m | Application: | Mining |
| Engine: | Cummins 6CTA8.3-C180 | Pull Back Capacity: | 30KN |
| Gross Weight: | 9300KG | Engine Power: | 145kw |
| Size: | 5100×2200×2650mm | ||
| High Light: | core drilling machine,hydraulic core drilling machine |
||
Full Hydraulic Diamond Core Drill Rig Mounted On Crawler Skid And Trailer
Application
The JCD1000 hydraulic core drilling rig of full hydraulic and rotator adopted the technology of wire-line coring, has been the dominant type rig for solid mineral deposits prospecting in developed counties in the world. It is also the developing direction of drilling technique and drilling equipment in China.This type of hydraulic geological drill rig could substitute imported products.
Characteristics
It could be applied to exploration and prospecting of geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries. The JCD1000 hydraulic core drilling rig is equipped with a series motor driving pump. The feeding and lifting of rotator are driven in the structure of cylinder directly pushing, with a 3.5m (11.5 feet) stroke. The rotation of spindle is driven by a single engine. It has four mechanical shifts of range of speeds, and the speed could be adjusted hydraulically with steeples change. The hydraulic geological drill rig is simple in structure. It is light and easy for transference; the mast has the functions of sliding and touching ground; the spindle lifted and lowered with hydraulic cylinder; it could be folded for transport and relocation. The spindle hole is in large diameter.
Specification
| Diesel Engine of JCD1000 hydraulic core drilling rig | Model | Cummins 6BTA5.9-C180 (turbocharged and charge water cooled) |
| Displacement | 5.9L (1.56 US Gallons) | |
| Power | 132Kw (180HP) | |
| Rated RPM (Factory setting) | 2200rpm | |
| Drilling Capacity of hydraulic geological drill rig | BQ hydraulic core drilling rig | 1000m(3280feet) |
| NQ hydraulic core drilling rig | 700m(2296 feet) | |
| HQ geological drill rig | 500m(1640 feet) | |
| PQ hydraulic geological drill rig | 300m(984 feet) | |
| Rotation Motor | Hydraulic Motor-variable Maker: SAUER-DANFOSS | |
| RPM | Four Shifts/ Steeples Change 0-1100 RPM | |
| Ratios | 1st 14.422:1 2nd 8.171:1 3rd 4.519:1 4th 2.652:1 | |
| Drill Head JCD1000 hydraulic core drilling rig | Head Opener | Pivoting style, Manual actuated |
| Hydraulic Chuck(PQ) | Hydraulically opened, Disc Spring Clamping, Normally C Closed Type Axial Holding Capacity of 222 400 N | |
| Max. Torque hydraulic geological drill rig | 3700 N·m(2727 lbf·ft) | |
| Hold Diameter | 121 mm(4.76 inch) | |
| Max. Lifting capacity of Spindle | 150 kN(33720 lbf) | |
| Max. Feeding Power hydraulic core drilling rig | 60 kN(13480 lbf) | |
| Hydraulic pump Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks. With load sensing system. | Maker: DANFOSS 1st Pump: 148LPM at 31.5MPa 2nd Pump:120LPM at 28MPa 3rd Pump: 50 LPM at 16MPa | |
| Capacity JCD1000 hydraulic core drilling rig | 310 L (82 US Gallons) | |
| Hoisting force (single wire) | 57kN(12814 lbf) (bare drum) | |
| Hoisting Speed (single wire) | 38-70m/min(bare drum) | |
| Hoist hydraulic geological drill rig | Steel Wire Diameter | 18 mm(0.71 inch) |
| Steel Wire Length | 50 m(164 feet) | |
| Hoisting Force (single wire) | 1200 Kg(2646 lb) (bare drum) | |
| Hoisting Speed (single wire) | 60-90m/min (bare drum) | |
| Steel Wire Diameter | 5.3 mm(0.2 inch) | |
| Steel Wire Length | 1000 m(3280 feet) | |
| Mast Height | 9.6 m(31.49 feet) | |
| Mast Adjusting Angle | 0°—90° | |
| Drilling Angle | 45º off horizontal to 90ºvertical down | |
| Feed Pull | 15000kg(33075 lb) | |
| Mast | Feed Thrust | 6000kg(13230 lb) |
| Rod Pull | 3m or 6m(9.84feet or 19.68feet) | |
| Feeding Stroke | 3500 mm(137.80 inch) | |
| Slippage Stroke | 600 mm(23.62 inch) | |
| Type | Reciprocating pump Triplex Plunger | |
| Mud Pump | Model | BW160/10 |
| Stroke | 70mm(2.76 inch) | |
| Discharge pressure | 2.5, 4.0, 6.5, 10.0 Mpa (363, 580, 943, 1450 psi) | |
| Clamping Scope | 55.5-110 mm(2.19-4.33 inch) through hole Ф154mm(6.06 inch) | |
| Weight (platform type) | 9300 Kg(20506 lb) | |
| Others | Dimensions (L×W×H) | 5100×2200×2650mm (200×86.6×104.3 inch) |
| Transport Way | Crawler |
Show
Service
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely the after sales service begin from the order confirmation, last for the working life of the equipment.
Contact Person: Ms. Sekura Yu
Tel: +8613811398425
Fax: 86-10-57159802
