Payment & Shipping Terms:
|Model Number:||AK120||Drill Rock Hardness:||F=6-20|
|Type:||Rotary Drilling Rig||Usage:||Anchor Drilling,construction|
|Drilling Depth:||120m||Drilling Diameter:||90-250mm|
|Air Consumption:||16-40m3/min||Drilling Pipe Length:||1500mm|
|Hole Angle Range:||0-360°||Rotary Speed:||30-80 R/min|
crawler mounted drill rig,
anchor drilling rig
80 - 120 m Drilling Depth Dual Top Drive Drilling Equipment for Large Diameter Anchor Pile Holes AK120
Diesel engine&electric motor drive available
AK120 anchor engineering drilling rig is a full hydraulic operated dual-top drive power head drilling machine. It is widely used to drill large pretension anchor wire holes, large diameter anchor pile holes and grouting holes at the side slope of water power station, expressway or railway projects, as well as small size foundation pile holes etc.
1. Dual-top drive power head realizes various drilling methods, such as:
2. When drilling a hole in thicker (30～50 m) fractured zone or congeries, rear power head connected with the inner drilling tool and DTH hammer, to realize percussion rotary drilling, in the meanwhile, the front power head rotates the follow-up casing for protecting the hole wall.
3. When drilling a hole in incoherent overlying formation, quicksand layer or silt layer, the inner drilling tool use conventionally rotary tools or long auger drilling tools, in the meanwhile, the front power head rotates the follow-up casing for protecting hole wall.
4. When drilling a hole in intact formation, only one power head is used for ordinary rotary drilling or percussion-rotary drilling.
5. It features high lift capacity and output torque, strong solving accident ability and high drilling efficiency.
6. It carries out mechanization of rod and casing breaking down, as it equipped with the clamp and breakout machine, so it can significantly reduce labor strength and increase work efficiency.
7. Building block and combined structure design as well as twin hydraulic pumps system are adopted in the machine, so it features good disassembility , convenient mounting and dismounting, and especially suitable for working in the inconvenient traffic mountain areas.
|Drilling depth||120 ~ 80m|
|Drilling diameter||¢ 110 ~ ¢ 250mm|
|Power head compensation before the trip||400mm|
|Drilling dip||-10 ~ 90 °|
|Power head speed||after power head 3 ~ 130r / min before the power head 3 ~ 22r / min|
|Power Head Maximum torque||power after power head 3500Nm former head 10000Nm|
|Power head stroke||1500mm|
|mast slip stroke||600mm|
|Recommended drill specifications||¢ 89 × 1000; ¢ 114 × 1000|
|Recommended casing specifications||¢ 168 × 1000; ¢ 178 × 1000; ¢ 194 × 1000|
|power head feed capacity||lifting force 100KN; increase pressure 52KN|
|casing shackle moment||15KNm|
|Motor Type||Y180L-4 × 2|
|hydraulic system rated pressure||18Mpa|
|Rig total mass||2500Kg|
|maximum disintegration Quality||400Kg|
|Host Dimension||L × W × H 3500 × 1200 × 1600mm|
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate
Contact Person: Nicole Shen