Drilling Water Well Hydraulic Crawler Drilling Machine for Sale
CWD180 deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.
|1||Geology drilled|| ||All kinds|
|2||Drilling Type|| ||DTH & Mud Rotary|
|3||Drill system and operation|| ||Hydraulic|
|8||Drill pipe diameter||mm||76/89|
|9||Drill pipe length||mm||3000|
|10||Max. Feed Speed||M/min||0-25|
|11||Max. Lifting Speed||M/min||5-14|
|13||Max. Lifting force||Ton||12|
|15||Lifting force of hoist||T||1.5|
|16||Lifting height of tool winch||m||40|
|17||Diesel Engine type||QUANCHAI|
|18||Rated Horse power||Kw||55|
|20||Compressor Type||Rotary Screw/Movable|
|27||Discharge pressure (Mpa)||Mpa||2.5-7|
|28||Suction tube diameter||mm||76|
|29||Discharge pipe diameter||mm||51|
1.The drilling rig can use air DTH Hammer drilling and mud drilling.
2.Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3.The main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4.It's a hydraulicrotary drilling rig with directional circulation. It can equipped with BW450 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The power of drilling rig comes from a diesel engine,55kw Quanchai engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
6.The rotary head,have two gear,rotation speed is 0-100rpm and the rotary torque is 4200-5600Nm.
1. We have service team to supply professional guidance for installation.
2. Our quality inspection department will check each of machine before leaving the factory.
3. We offer one-year quality warranty for main body of machine.
4. All of machines we sold hold the ISO, QC, TUV certificates and so on.